X-BEAM 100

Key Features of X-BEAM 100 

• ON-OFF Push Switches.

• Major & Minor Power Line Compensation.

• KVP Selection from 45 KVP to 100 KVP in steps of 5 KVP.

• Technic Selector – To select 25mA, 50mA & 100mA.

• Exposure time selection from .02 sec. to 5 sec. in 24 Steps.

• Mode Selector – To Select Fluoroscopy, Radiography or Bucky Radiography.

• Fluoro mA Selection.

• Preparation & Exposure Push Switches.

• LED indication for Line on, X-Ray on & Tube overload.

• Power Line Compensation Indicator.

• mA indication for Radiography & Fluoroscopy.

• The system will automatically trip off in case of failure in H.T. or L.T. Circuit.

• There will be no Exposure if the selection of KV, mA & Time exceeds Tube rating.

• X-Ray initiation by means of Hand Switch or from control.

• Fluoroscopic time totalizer.

 Technical Specification:

•  Full wave Rectified Two Pulse X-Ray Generator.

• Radiographic Voltage – 45 to 100 KVP

• Fluoroscopic Voltage – 45 to 100 KVP

• Fluoroscopic mA – 0 – 3mA

• X-Ray Tube – Stationary Anode or Rotating Anode, as per requirement.

• Power Requirement – 230/50Hz with line resistance .4 ohm or 400V/50Hz line resistance 1.2 ohm with 10 KVP Phase reducing Transformer.

| Home |  Products  | Contact us |  Feedback |